Jump to content

Recommended Posts

Post your gamer setups here along with your CS configs and shit (sensitivity, binds, in-game settings, fps autoexec, etc). I've been looking for the right resolution for a while because I can't see shit on 1920x1080 even while I'm next to my screen.

Share this post


Link to post
Share on other sites

I used to use Shrouds config for csgo https://www.prosettings.com/shroud-csgo-settings/, 2.2 Sens is what i usually use and always have over the span of 5 years or so playing Source/GO

I Always play with lowest settings possible with shadows on medium, I personally have always used 1366×768 and usually dont have any visual issues.

there is probably better configs out there in terms of FPS, but I use shrouds because it feels smooth to me so I use it.

Share this post


Link to post
Share on other sites

autoexec.cfg

My (probably outdated by now) autoexec i've been using for years. Probably not optimal but its worked fine for me. Also 1920 is the way to go if you can run it, theres no reason to go down in resolution in my opinion.

Share this post


Link to post
Share on other sites
5 minutes ago, virr said:

autoexec.cfg 6.15 kB · 1 download

My (probably outdated by now) autoexec i've been using for years. Probably not optimal but its worked fine for me. Also 1920 is the way to go if you can run it, theres no reason to go down in resolution in my opinion.

My eyes are really bad, but wearing glasses while I play games gives me a huge headache. Lower resolutions with some special settings stretch the view models for me, making it a lot easier to play.

Share this post


Link to post
Share on other sites
12 minutes ago, virr said:

autoexec.cfg 6.15 kB · 1 download

My (probably outdated by now) autoexec i've been using for years. Probably not optimal but its worked fine for me. Also 1920 is the way to go if you can run it, theres no reason to go down in resolution in my opinion.

when I actually do scrims and shit, that alias is gonna be a fucking lifesaver holy shit

Share this post


Link to post
Share on other sites
1 hour ago, Soulify said:

maybe use glasses?!?!?!?

I wear glasses but they just hurt my eyes when I use them on the computer, not really much need to unless you're approaching legally blind.

I used to play 1360x768 but I was having a v hard time making details out so I switched to 1980. I use .675 sens 800 dpi 

autoexec.cfg

Share this post


Link to post
Share on other sites

I play on a terrible computer and this shit has helped me double my fps from 20 to 40.

I play on all lowest settings except for my resolution, which is at 1080p.

If anyone who's good at this could tell me what to add/remove to get more fps it would be GREATLY appreciated. 

Sensitivity: 2.00 in-game sense, 1400 DPI. (yeah I know it's "high")

Launch options: -high -freq 75 -d3d9ex -nojoy -threads 2  -novid +mat_queue_mode 2 +exec autoexec.cfg +cl_forcepreload 1

Autoexec as of right nowhttps://pastebin.com/rVQux7um (pastebin makes it easier for people to check out your cfg without having to get on their computer and download it ?)

You may notice in the autoexec there is 3 crosshairs.
xhair1https://pastebin.com/StUfkstW (my old dot crosshair)
xhair2https://pastebin.com/jHt40F78 (the crosshair I use now, originally made it because dot crosshair was too big on 720p, which I thought would be a low enough resolution to play danger zone with decent fps, but after going back to 1080p with this crosshair still on I really liked it)
xhair3https://pastebin.com/TU1RrwCf (the crosshair I use to play danger zone with decent fps at 800x600 resolution)

IMPORTANT BIND FOR ALL 10MANNERS
alias scrim "password scrim123; connect 216.52.148.183:27015"
(once you have this in your autoexec, just type scrim in console and it'll make you join the scrim server)

This command below makes net_graph (the thing that shows fps and shit) appear only when you open up the scoreboard:

net_graph 1
alias -scorenet "-showscores; net_graphheight 9999"
alias +scorenet "+showscores; net_graphheight 0"
bind tab +scorenet
 

This command below allows a noob like me who uses scrollwheel to switch weapons to be able to also change my scrollwheel to jump:

bind "o" "bind mwheelup invprev; bind mwheeldown invnext"
bind "p" "bind mwheeldown +jump; bind mwheelup +jump"
 

There's a lot of chat binds and server binds in there so just ignore those I guess.
Having something like echo "AUTOEXEC SUCCESSFULLY LOADED" at the end of your autoexec is fun to have just so you know it worked. It usually does, so it's really just cosmetic for me.
Here's a direct download to my autoexec:

autoexec.cfg

 

Edited by Dannypicacho
sens (see edit history)

Share this post


Link to post
Share on other sites
21 minutes ago, Roy said:

@Tatost, send me a link of a better microphone, My old one is greasy like a taco, moldy cuz I get horny and I lick it, and It smells... Fine but I need a new one.

what's your budget

Share this post


Link to post
Share on other sites
14 hours ago, Dannypicacho said:

I play on a terrible computer and this shit has helped me double my fps from 20 to 40.

I play on all lowest settings except for my resolution, which is at 1080p.

If anyone who's good at this could tell me what to add/remove to get more fps it would be GREATLY appreciated. 

Sensitivity: 2.00 in-game sense, 1400 DPI. (yeah I know it's "high")

Launch options: -high -freq 75 -d3d9ex -nojoy -threads 2  -novid +mat_queue_mode 2 +exec autoexec.cfg +cl_forcepreload 1

Autoexec as of right nowhttps://pastebin.com/rVQux7um (pastebin makes it easier for people to check out your cfg without having to get on their computer and download it ?)

You may notice in the autoexec there is 3 crosshairs.
xhair1https://pastebin.com/StUfkstW (my old dot crosshair)
xhair2https://pastebin.com/jHt40F78 (the crosshair I use now, originally made it because dot crosshair was too big on 720p, which I thought would be a low enough resolution to play danger zone with decent fps, but after going back to 1080p with this crosshair still on I really liked it)
xhair3https://pastebin.com/TU1RrwCf (the crosshair I use to play danger zone with decent fps at 800x600 resolution)

IMPORTANT BIND FOR ALL 10MANNERS
alias scrim "password scrim123; connect 216.52.148.183:27015"
(once you have this in your autoexec, just type scrim in console and it'll make you join the scrim server)

This command below makes net_graph (the thing that shows fps and shit) appear only when you open up the scoreboard:

net_graph 1
alias -scorenet "-showscores; net_graphheight 9999"
alias +scorenet "+showscores; net_graphheight 0"
bind tab +scorenet
 

This command below allows a noob like me who uses scrollwheel to switch weapons to be able to also change my scrollwheel to jump:

bind "o" "bind mwheelup invprev; bind mwheeldown invnext"
bind "p" "bind mwheeldown +jump; bind mwheelup +jump"
 

There's a lot of chat binds and server binds in there so just ignore those I guess.
Having something like echo "AUTOEXEC SUCCESSFULLY LOADED" at the end of your autoexec is fun to have just so you know it worked. It usually does, so it's really just cosmetic for me.
Here's a direct download to my autoexec:

autoexec.cfg 3.11 kB · 0 downloads

 

 remove everything and ur fine ?

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now